CöLöRs offers ready to use UV ink which gives a matt effect, thus an additional process of matt spot varnishing can be eliminated. The quality and depthness achieved is incomparable and much higher than that delivered by conventional printing.
Substrates: Acrylic ABS, HIPS, PVC, PC, Treated PP and PE.
Properties: Pad printings inks are suitable for high speed wet on wet printing.
- Molded Surface
- Gift Articles
Color Shades Product Code PRIMROSE YELLOW CMC9001 LEMON YELLOW CMC9002 PERMANENT YELLOW CMC9003 GOLDEN YELLOW CMC9004 WARM YELLOW CMC9005 FLAG ORANGE CMC9006 UNIVERSAL ORANGE CMC9007 FIRE ORANGE CMC9008 BRILLIANT RED CMC9009 PERMANENT RED CMC9010 POPULAR RED CMC9011 DEEP RED CMC9012 PEACOCK BLUE CMC9013 SKY BLUE CMC9014 ROYAL BLUE CMC9015 PERMANENT BLUE CMC9016 INDIA BLUE CMC9017 BRONZE BLUE CMC9018 RICH ROYAL BLUE CMC9019 POPULAR VIOLET CMC9020 BRIGHT VIOLET CMC9021 PERMANENT VIOLET CMC9022 UNIVERSAL VIOLET CMC9023 PURPLE CMC9024 VIVID GREEN CMC9025 BRIGHT GREEN CMC9026 COCOA BROWN CMC9027 INTENSE BROWN . CMC9028 AQUA TINT CMC9029 SEA TINT CMC9030 GRASS TINT CMC9031 BISCUIT TINT CMC9032 BADAM TINT CMC9033 ROSE PINK CMC9034 STEEL GREY CMC9035 PROCESS YELLOW CMC9036 PROCESS MAGENTA CMC9037 PROCESS CYAN CMC9038 PROCESS BLACK CMC9039 DENSE BLACK CMC9040 BRIGHT MAGENTA CMC9041
The recommended mesh is 90 to 120 threads/cm (230 threads/in to 305 threads/ in).
Recommended with this ink : single, double or triple durometer polyurethane blades with hardness between 85 and 75 shores.
1 to 3 min at ambient temperature.
Various diluents are available according the needed curing speed :
Fast curing : ECO Rapide R
Medium curing : ECO Moyen M
Slow curing : ECO Lent L
Retarder : ECO Retardeur RTD
Detail will come here
COLORS standard cleaning solvents are : Solvent H, ECO N Solvent and 93801 solvent.
Mesh : 140
Shades : Available on request
Conveyor Speed : 20 – 30 Meters /min
Lamps : 1
Lamp Int : 300 watt/inch
Substrates : Can be formulated accordingly.
Shelf Life : 3 months from the date of manufacturing.
Light Fastness : 4-5 (wool scale).
Storage : Store at moderate temperatures in a dry, well ventilated area and away from direct sunlight.
Pre-cautions : Use of gloves and eye wear is recommended.
Important Note : Strictly for over printing only. Cannot be overprinted.
Additional information : The information provided is based on extensive laboratory testing. Cure speeds depends on condition of UV lamps, reflectors, opacity and film thickness. We recommend that you pretest any ink prior to beginning a production run.
Technical Literature : # 400.05.00
Standard and Legislations:
For full details about our inks’ conformity with current standards, please refer to the document ECO SYSTEM LABEL by COLORS
Material safety data sheet available at : email@example.com
COLORS guarantee the quality of our products. We cannot however guarantee the finished results because we exercise no control over an individual operating procedures. Our responsibility is limited solely to the exchange of ink or varnish. The quality of a substrate to be printed can vary, as can an ink being overprinted; therefore the above information is given in good faith based on the state of our art and prior experience. This statement also applies to our technical assistance. When using our inks and varnishes on a new substrate or when changing operating procedures, we strongly recommend testing before use in a production situation to ensure full compatibility. Please refer to our General Conditions of Sales.