CöLöRs offers ready to use UV ink which gives a matt effect, thus an additional process of matt spot varnishing can be eliminated. The quality and depthness achieved is incomparable and much higher than that delivered by conventional printing.
Substrates: Treated and Untreated PP and Treated PE.
Properties: These flame free solvent inks have good adhesion and abrasion resistance.
- Container Lids
Color Shades Product Code PRIMROSE YELLOW CMC8001 LEMON YELLOW CMC8002 PERMANENT YELLOW CMC8003 GOLDEN YELLOW CMC8004 WARM YELLOW CMC8005 FLAG ORANGE CMC8006 UNIVERSAL ORANGE CMC8007 FIRE ORANGE CMC8008 BRILLIANT RED CMC8009 PERMANENT RED CMC8010 POPULAR RED CMC8011 DEEP RED CMC8012 PEACOCK BLUE CMC8013 SKY BLUE CMC8014 ROYAL BLUE CMC8015 PERMANENT BLUE CMC8016 INDIA BLUE CMC8017 BRONZE BLUE CMC8018 RICH ROYAL BLUE CMC8019 POPULAR VIOLET CMC8020 BRIGHT VIOLET CMC8021 PERMANENT VIOLET CMC8022 UNIVERSAL VIOLET CMC8023 PURPLE CMC8024 VIVID GREEN CMC8025 BRIGHT GREEN CMC8026 COCOA BROWN CMC8027 INTENSE BROWN . CMC8028 AQUA TINT CMC8029 SEA TINT CMC8030 GRASS TINT CMC8031 BISCUIT TINT CMC8032 BADAM TINT CMC8033 ROSE PINK CMC8034 STEEL GREY CMC8035 PROCESS YELLOW CMC8036 PROCESS MAGENTA CMC8037 PROCESS CYAN CMC8038 PROCESS BLACK CMC8039 DENSE BLACK CMC8040 BRIGHT MAGENTA CMC8041
The recommended mesh is 90 to 120 threads/cm (230 threads/in to 305 threads/ in).
Recommended with this ink : single, double or triple durometer polyurethane blades with hardness between 85 and 75 shores.
1 to 3 min at ambient temperature.
Various diluents are available according the needed curing speed :
Fast curing : ECO Rapide R
Medium curing : ECO Moyen M
Slow curing : ECO Lent L
Retarder : ECO Retardeur RTD
Detail will come here
COLORS standard cleaning solvents are : Solvent H, ECO N Solvent and 93801 solvent.
Mesh : 140
Shades : Available on request
Conveyor Speed : 20 – 30 Meters /min
Lamps : 1
Lamp Int : 300 watt/inch
Substrates : Can be formulated accordingly.
Shelf Life : 3 months from the date of manufacturing.
Light Fastness : 4-5 (wool scale).
Storage : Store at moderate temperatures in a dry, well ventilated area and away from direct sunlight.
Pre-cautions : Use of gloves and eye wear is recommended.
Important Note : Strictly for over printing only. Cannot be overprinted.
Additional information : The information provided is based on extensive laboratory testing. Cure speeds depends on condition of UV lamps, reflectors, opacity and film thickness. We recommend that you pretest any ink prior to beginning a production run.
Technical Literature : # 400.05.00
Standard and Legislations:
For full details about our inks’ conformity with current standards, please refer to the document ECO SYSTEM LABEL by COLORS
Material safety data sheet available at : firstname.lastname@example.org
COLORS guarantee the quality of our products. We cannot however guarantee the finished results because we exercise no control over an individual operating procedures. Our responsibility is limited solely to the exchange of ink or varnish. The quality of a substrate to be printed can vary, as can an ink being overprinted; therefore the above information is given in good faith based on the state of our art and prior experience. This statement also applies to our technical assistance. When using our inks and varnishes on a new substrate or when changing operating procedures, we strongly recommend testing before use in a production situation to ensure full compatibility. Please refer to our General Conditions of Sales.