CöLöRs offers ready to use UV ink which gives a matt effect, thus an additional process of matt spot varnishing can be eliminated. The quality and depthness achieved is incomparable and much higher than that delivered by conventional printing.
Substrates: Powder coated metals, Glass, Plastics, Treated PP and PE.
Properties: Two pack epoxy resin inks with good adhesion on difficult substrates with chemical and solvent resistance.
- Packaging containers
Color Shades Product Code PRIMROSE YELLOW CMC6001 LEMON YELLOW CMC6002 PERMANENT YELLOW CMC6003 GOLDEN YELLOW CMC6004 WARM YELLOW CMC6005 FLAG ORANGE CMC7006 UNIVERSAL ORANGE CMC6007 FIRE ORANGE CMC6008 BRILLIANT RED CMC6009 PERMANENT RED CMC6010 POPULAR RED CMC6011 DEEP RED CMC6012 PEACOCK BLUE CMC6013 SKY BLUE CMC6014 ROYAL BLUE CMC6015 PERMANENT BLUE CMC6016 INDIA BLUE CMC6017 BRONZE BLUE CMC6018 RICH ROYAL BLUE CMC6019 POPULAR VIOLET CMC6020 BRIGHT VIOLET CMC6021 PERMANENT VIOLET CMC6022 UNIVERSAL VIOLET CMC6023 PURPLE CMC6024 VIVID GREEN CMC6025 BRIGHT GREEN CMC6026 COCOA BROWN CMC6027 INTENSE BROWN . CMC6028 AQUA TINT CMC6029 SEA TINT CMC6030 GRASS TINT CMC6031 BISCUIT TINT CMC6032 BADAM TINT CMC6033 ROSE PINK CMC6034 STEEL GREY CMC6035 PROCESS YELLOW CMC6036 PROCESS MAGENTA CMC6037 PROCESS CYAN CMC6038 PROCESS BLACK CMC6039 DENSE BLACK CMC6040 BRIGHT MAGENTA CMC6041
The recommended mesh is 90 to 120 threads/cm (230 threads/in to 305 threads/ in).
Recommended with this ink : single, double or triple durometer polyurethane blades with hardness between 85 and 75 shores.
1 to 3 min at ambient temperature.
Various diluents are available according the needed curing speed :
Fast curing : ECO Rapide R
Medium curing : ECO Moyen M
Slow curing : ECO Lent L
Retarder : ECO Retardeur RTD
Detail will come here
COLORS standard cleaning solvents are : Solvent H, ECO N Solvent and 93801 solvent.
The CEX series has the great advantage to be mixable with two different hardeners.
Hardener added at a 8 to 10% ratio, extends the pot life of the mix up to 6 months in a closed container. It reduces ink consumption and makes the ink easier to use on the long run.
Hardener N°3 accelerates the curing speed without curing in the screen. The pot life once activated is only a few days.
Mesh : 140
Shades : Available on request
Conveyor Speed : 20 – 30 Meters /min
Lamps : 1
Lamp Int : 300 watt/inch
Substrates : Can be formulated accordingly.
Shelf Life : 3 months from the date of manufacturing.
Light Fastness : 4-5 (wool scale).
Storage : Store at moderate temperatures in a dry, well ventilated area and away from direct sunlight.
Pre-cautions : Use of gloves and eye wear is recommended.
Important Note : Strictly for over printing only. Cannot be overprinted.
Additional information : The information provided is based on extensive laboratory testing. Cure speeds depends on condition of UV lamps, reflectors, opacity and film thickness. We recommend that you pretest any ink prior to beginning a production run.
Technical Literature : # 400.05.00
Standard and Legislations:
For full details about our inks’ conformity with current standards, please refer to the document ECO SYSTEM LABEL by COLORS
Material safety data sheet available at : firstname.lastname@example.org
COLORS guarantee the quality of our products. We cannot however guarantee the finished results because we exercise no control over an individual operating procedures. Our responsibility is limited solely to the exchange of ink or varnish. The quality of a substrate to be printed can vary, as can an ink being overprinted; therefore the above information is given in good faith based on the state of our art and prior experience. This statement also applies to our technical assistance. When using our inks and varnishes on a new substrate or when changing operating procedures, we strongly recommend testing before use in a production situation to ensure full compatibility. Please refer to our General Conditions of Sales.