CöLöRs offers ready to use UV ink which gives a matt effect, thus an additional process of matt spot varnishing can be eliminated. The quality and depthness achieved is incomparable and much higher than that delivered by conventional printing.
Substrates: Treated and Untreated PP and Treated PE.
Properties: These inks have good adhesion and resistance to battery acid and alkali.
Color Shades Product Code PRIMROSE YELLOW CMC5001 LEMON YELLOW CMC5002 PERMANENT YELLOW CMC5003 GOLDEN YELLOW CMC5004 WARM YELLOW CMC5005 FLAG ORANGE CMC5006 UNIVERSAL ORANGE CMC5007 FIRE ORANGE CMC5008 BRILLIANT RED CMC5009 PERMANENT RED CMC5010 POPULAR RED CMC5011 DEEP RED CMC5012 PEACOCK BLUE CMC5013 SKY BLUE CMC5014 ROYAL BLUE CMC5015 PERMANENT BLUE CMC5016 INDIA BLUE CMC5017 BRONZE BLUE CMC5018 RICH ROYAL BLUE CMC5019 POPULAR VIOLET CMC5020 BRIGHT VIOLET CMC5021 PERMANENT VIOLET CMC5022 UNIVERSAL VIOLET CMC5023 PURPLE CMC5024 VIVID GREEN CMC5025 BRIGHT GREEN CMC5026 COCOA BROWN CMC5027 INTENSE BROWN . CMC5028 AQUA TINT CMC5029 SEA TINT CMC5030 GRASS TINT CMC5031 BISCUIT TINT CMC5032 BADAM TINT CMC5033 ROSE PINK CMC5034 STEEL GREY CMC5035 PROCESS YELLOW CMC5036 PROCESS MAGENTA CMC5037 PROCESS CYAN CMC5038 PROCESS BLACK CMC5039 DENSE BLACK CMC5040 BRIGHT MAGENTA CMC5041
The recommended mesh is 90 to 120 threads/cm (230 threads/in to 305 threads/ in).
Recommended with this ink : single, double or triple durometer polyurethane blades with hardness between 85 and 75 shores.
1 to 3 min at ambient temperature.
Various diluents are available according the needed curing speed :
Fast curing : ECO Rapide R
Medium curing : ECO Moyen M
Slow curing : ECO Lent L
Retarder : ECO Retardeur RTD
Detail will come here
COLORS standard cleaning solvents are : Solvent H, ECO N Solvent and 93801 solvent.
Mesh : 140
Shades : Available on request
Conveyor Speed : 20 – 30 Meters /min
Lamps : 1
Lamp Int : 300 watt/inch
Substrates : Can be formulated accordingly.
Shelf Life : 3 months from the date of manufacturing.
Light Fastness : 4-5 (wool scale).
Storage : Store at moderate temperatures in a dry, well ventilated area and away from direct sunlight.
Pre-cautions : Use of gloves and eye wear is recommended.
Important Note : Strictly for over printing only. Cannot be overprinted.
Additional information : The information provided is based on extensive laboratory testing. Cure speeds depends on condition of UV lamps, reflectors, opacity and film thickness. We recommend that you pretest any ink prior to beginning a production run.
Technical Literature : # 400.05.00
Standard and Legislations:
For full details about our inks’ conformity with current standards, please refer to the document ECO SYSTEM LABEL by COLORS
Material safety data sheet available at : firstname.lastname@example.org
COLORS guarantee the quality of our products. We cannot however guarantee the finished results because we exercise no control over an individual operating procedures. Our responsibility is limited solely to the exchange of ink or varnish. The quality of a substrate to be printed can vary, as can an ink being overprinted; therefore the above information is given in good faith based on the state of our art and prior experience. This statement also applies to our technical assistance. When using our inks and varnishes on a new substrate or when changing operating procedures, we strongly recommend testing before use in a production situation to ensure full compatibility. Please refer to our General Conditions of Sales.